• 1000 lb. single patient weight capacity
  • Weight: 42 lbs.
  • Size: 85.42” x 27.94” x 8.86”
  • 12 - 2” x 6” hand holes
  • 4 - 3/4” diameter grab rope loop holes


  • Drab Green
  • Sand
  • Coyote Brown
Custom colors available for a small fee, minimum quantities apply


  • 3" runner width
  • Weight: 35 lbs.
  • Nest Size: 77.56” x 18.5”
  • Patient Nest Depth: 4” high sides
  • Patient Nest Depth: 2.25” low sides
  • 14 - 2” x 3” strap harness holes
  • Specs
  • Colors
  • Patient Nest

The MP Carrier is a must have for ice and water rescue and can be towed behind a snowmobile, skier, personal watercraft, or ATV. Constructed of high density roto-molded polyethylene plastic and features a seamless design. Foam filled for flotation and patient insulation.

With the stabilizers attached, the MP Carrier floats over 300 lbs. Stabilizer floats are available for an additional cost, and must be used for water or ice rescue.

The MP Carrier can be used for a Haz-Mat decon tray with a garden hose attached to the fittings for containment.

The design features enable multiple units to stack together for easy storage The bottom runner width fits ground ladder rails for ladder slides, 4 non-slip strips and 18 speedclip pins.

Various strapping accessories are available for an additional cost.

Item #722

Military MP Carrier

Item #722STAB

Military Stabilizer floats
Rapid Deployment Products © 2023 / 100 Steam Whistle Dr Ivyland PA 18974 / 1 877 4 DEPLOY / Site: Red Plug Design Co.